How Does The Oil Cylinder Seal Pass Through The Oil Hole And The Coaxial Relationship With The Oil Cylinder
Aug 02, 2021
For the website product cylinder seal, at the same time, it is also a very important part in the cylinder, because it is to ensure that the hydraulic oil in the cylinder does not leak and other problems, so I said so. Since it is very important, you should not be sloppy or slack in learning about it. So next, we might as well continue this work on the basis of the previous ones, so that everyone can increase their knowledge. .
1. Is it necessary to check the oil cylinder seals before installation? If you want to proceed, what are the specifics?
The inspection before installation of the cylinder seal is a must from a professional point of view. Therefore, on the first question, the answer is necessary. Because, if you don't do it, once a problem occurs, it will affect the sealing effect of the seal and the normal use of the oil cylinder, so you must not be sloppy. In terms of specific content, it mainly depends on whether the seal has quality problems, and whether its size, etc., meets the requirements for use.
2. How does the cylinder seal come through the oil hole?
The oil cylinder seal is actually very simple to pass the oil hole. It is only necessary to polish the connection between the inner diameter of the cylinder barrel and the oil hole into an arc shape, and when installing, apply a proper amount of lubricating oil on it. Then, this work can be successfully completed. Moreover, it can also avoid the problems of strain or damage to the seal.
3. If it is a low-pressure hydraulic cylinder, which one should be used in the type of cylinder seal? In addition, can the cylinder seal determine the coaxiality of the cylinder?
In low-pressure hydraulic cylinders, in terms of the specific types of cylinder seals, generally speaking, O-rings are used, and in terms of material, they can be fluorine rubber. As for the reason, it is because of its good sealing effect. In question 2, the answer is no, because there is no relationship between the cylinder seal and the cylinder coaxiality. Therefore, there is no such a statement. The determinant of the cylinder coaxiality is the guiding factor. Piece of this one.
