Terms And Types Used in Rubber Seals
Jul 30, 2021
Rubber seals, learning and mastering its related knowledge and content is an important task, because it is an important product in the website, and the learning attitude should not be sloppy, so as not to affect the absorption and utilization of knowledge. So, in order to respond to this specific request, the following, without further ado, let's proceed immediately, I hope you can gain some insights and inspiration from it.
1. In the fan seal, which is the specific type of rubber seal?
Fan seal, if it is elaborated in detail, it refers to a type of seal that relies on the input mechanical seal to achieve a sealing effect. Therefore, in the specific types of rubber seals, it is more appropriate to use non-contact rubber mechanical seals.
2. What is the service temperature of cyanide rubber seals? And, if the rubber seal is deformed, what are the specific reasons?
The use temperature of cyanide rubber seals is -25-110 degrees Celsius, of which 15-90 degrees Celsius is the majority. If it exceeds this range, then silicone rubber or fluorine rubber can be used. In addition, the deformation of the rubber seal may be caused by not only the storage environment, or the compression during packaging and transportation.
3. Are there any professional terms such as inner diameter, outer diameter and wire diameter in rubber seals?
The inner diameter, outer diameter and wire diameter of rubber seals are mainly for O-shaped rubber seals, because there are two types of specifications, which are inner diameter + wire diameter, and outer ring + wire diameter. However, in general, it is mostly the inner diameter + wire diameter.
Regarding rubber seals, I believe that through the above, you can make progress and breakthroughs in the learning of the product, and thus, you can also increase your knowledge in this area. Moreover, if the above content is firmly grasped, it can also play a certain role in our actual work, and further enhance the use effect of the product.
