Product News

The Reasons For The Failure Of The Oil Seal Seal Ring

The reasons for the failure of the oil seal seal ring are as follows: 1. The pressure inside the box is too high Under normal circumstances, the oil seal seal can withstand an internal pressure...

Description Of The Advantages Of Modified PTFE Oil Seal

Pure PTFE oil seal products do not have wear resistance. To make the PTFE oil seal material seal have wear resistance, the PTFE raw material should be filled and modified. Dongsheng Sealing Technol...

Bad Features Of Sealing Ring Products

1. Impurity: If it is not compatible with the rubber material, it will show different colors or obvious foreign matter on the product. 2. Cracks: There are obvious cracks on the inner and outer ...

Correct Installation Method Of Skeleton Oil Seal Ring

1. From the skeleton oil seal ring to assembly, it must be kept clean, and do not tear the wrapping paper prematurely to prevent debris from adhering to the surface of the skeleton oil seal ring an...

The bad use of the six properties directly affects the sealing effect

The bad use of the six properties directly affects the sealing effect

Material Selection Of Dustproof Sealing Ring

The oil seal can be used as a dust seal, but in a dusty working environment or to protect other seals, it is often necessary to use a special dust seal. Most of the dust-proof sealing rings of h...

The Importance Of Cylinder Seals in Hydraulic Cylinders

Hydraulic transmission uses hydraulic pressure to transmit power. In the hydraulic cylinder and the used hydraulic cylinder seal products, the function of the cylinder sealing device is to prevent ...

Causes Of Leakage Of Construction Machinery Hydraulic Sealing System

1. Working pressure of hydraulic sealing system of construction machinery Under the same conditions, the higher the pressure of the hydraulic system, the greater the possibility of leakage, so t...

Features Of Hydraulic Support Seals:

1. The seals of the hydraulic support are adapted to the needs of the working environment medium, and are not easy to swell and harden； 2. The seal of the hydraulic support has a certain resilienc...

Sealing Principle Of O-ring in Reciprocating Seal

In hydraulic rotating, pneumatic components and systems, reciprocating seals are a common sealing requirement. Reciprocating seals are used in power cylinder pistons and cylinder blocks, piston int...

How To Choose Hydraulic Seals

1. Analysis of hydraulic system In order to correctly select hydraulic seals, it is important to clarify the working environment and requirements of the hydraulic system through a detailed analysi...

Introduction To The Characteristics Of Gasket Seals

Any type of gasket seal product has the following important characteristics in order to ensure long-term sealing in harsh environments: 1. Gas tightness of gasket seals For the sealing medium o...