Cushion Ring For Rod HBTS
Model: HBTS
Temperature: -55/+160℃
Speed: ≤1.5m/s>
Pressure:≤35MPa
DSH Seals' HBTS is a standard double acting seal. Suitable for reciprocating movements, allowing large squeeze gaps and a wide range of applications. Excellent dynamic and static sealing performance, able to work in dusty environments. Low friction, simple grooves and adaptability to operating conditions. Suitable for use in reciprocating hydraulic systems. Excellent performance under high and low pressure and high frequency conditions. Suitable for long and short strokes. Suitable for large rod diameters under fluid and high pressure, e.g. bulldozers, compressors, etc.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description
The HBTS seal is a mechanical seal used in pumps. It is designed to prevent leakage of fluid or gas from the pump casing. The seal consists of two main parts, the fixed part and the rotating part. The fixed part is usually attached to the pump casing while the rotating part is mounted on the shaft.
HBTS seals are reliable and efficient sealing devices widely used in the chemical, oil and gas and water treatment industries. Its high performance features include resistance to high temperature, high pressure, corrosion and long service life. These features make them ideal for demanding pumps and critical applications.
HBTS seals are a critical component in pump systems to ensure safe and efficient operation. Its reliability and durability make it the standard choice for many industry professionals. Choosing the right seal will meet the specific requirements of the application and ensure the smooth operation of the pump.
Profile for HBTS Low-Friction PTFE Rod Seal with an Energized O-Ring. This is used to separate high temperature fluids, absorb shock and variable pressures under heavy loads, and increase packing durability. Because of its low frictional resistance, it can operate at high speeds with short strokes. Back pressure may seep through the slit on the tapered surface.
| Product Name | Cushion Ring for Rod HBTS |
| Material | NBR/FKM*PTFE*Bronze/Carbon |
| Speed | ≤1.5m/s |
| Temperature | -55+160°C |
| Pressure | ≤35MPa |
| Medium | Minderal oil based hydraulic fluids, barely flammable hydraulic fluids, water,air and others. |
| Standard or can fit the groove | Refer to the NOK-HBTS series standards. |
| Size | Dimension table available on request |
Advantages
No squeezing pressure; serial installation possible.
High sealing effect, both static and dynamic.
High pressure, excellent cushioning performance.
Low friction, low stickiness, and no stick-slip behavior.
High resistance to extrusion.
Strong resistance to corrosion
Simple design for a groove
Outstanding longitudinal stability, unaffected by temperature
Application
HBTS sealing application is the process of applying specialised seals to high pressure pipework, typically used in hydraulic systems. This sealing helps to prevent leakage, ensuring efficient system operation and reducing the risk of damage or failure.
HBTS seals are vital in industries such as oil and gas, aerospace and automotive engineering, where high pressure systems are common. By preventing leaks and ensuring the smooth running of systems, these seals help to improve safety, reduce waste and ultimately increase productivity.
The process of applying HBTS seals involves careful preparation of the pipe surface followed by the application of a sealant. The sealant is usually a specialised compound designed to withstand high pressures and temperatures and to come into contact with chemicals. After the sealant is applied, the sealant cures and hardens, creating a tight bond between the pipe and the sealant.
While the application of HBTS seals may seem like a small aspect of a larger system, it plays a vital role in maintaining the overall efficiency and safety of the system. With the right sealants and application techniques, these seals can make a huge difference in helping to ensure the smooth and safe operation of high-pressure systems.
The application of HBTS seals is an important process in many industries, helping to prevent leaks, damage and other potential problems. By investing in high quality sealants and ensuring they are applied correctly, companies can create safer, more efficient systems that realise their full potential.
Our Strength
The company has 5,000 square meters of professional production plants, 2000 square meters of constant temperature and humidity production workshop, dozens (sets) of advanced production equipment.
Own a professional and technical production team and sales service team.
The selection of raw materials are international first-line brand suppliers, In order to ensure product quality, we promise that don't add waste (recycled materials) in the material.
The company has developed 235 sealing materials formulas, and 1725 sealing type models are selected for customers.
Imported raw materials to the finished product of one-stop, CNC turning customized products without mold cost.
In 2015, we have passed ISO9001-2015 international quality system certification, and in 2022, the IATF automotive product international quality system certification was obtained. Refer to the design of the international brand structure, deepen the design guarantee sealing effect!
FAQ
Q: Are you trading company or manufacturer?
Q: What are your advantages?
Q: How long is your delivery time?
Q: Which payment form you can accept?
Q: What is your term of payment?
Hot Tags: cushion ring for rod hbts, China, suppliers, manufacturers, factory, customized, wholesale, Hydraulic Rod Seals Double Delta, double delta seal, hby buffer seals, buffer seal, Hydraulic Compact Rod Seals GSW, u cup B3
